PK PHR-200 Digital Magnetic Rockwell Hardness Tester
Barcol Impressor Malaysia Barcol Hardness Tester Selangor Barcol Hardness Tester Penang Barcol Hardness Tester Johor Digital Magnetic Rockwell Hardness Tester Malaysia
APPLICATION
- Apply to test too large or heavy iron and steel parts for the desk testers.
- Test the hardness of steel parts, bearings, moulds; large and medium-sized heating parts.
- Test a large batch of parts piece by piece on site.
- Replace inaccurate and unreliable Leeb hardness tester, in a wide range of manufacture industry.
FEATURES
- World leading product designed and manufactured by Tianxing with patent, because of high-accuracy sensor and unique distance measuring technology, reaching far higher test accuracy than other portable hardness testers.
- It is fixed onto the surface of a iron and steel part smartly with magnetic chucks. Simply reached one side of the part, the test could be accomplished. Only if the surface is available, a iron and steel part could be tested, no matter what shapes and sizes are.
- It follows the Rockwell Hardness Test Principle, and complies with relevant regulation of IS06508, and ASTM E18 standards.
- It simplifies the operation steps of Rockwell Hardness Test: directly load total test force; maintain it for a few seconds; release the total test force and then the test is finished. It takes about only 10 seconds for a test, high effictive.
- It permits customer to calibrate the tester with a standard block at any time.
- It could be operated under a temperature range of 0°C to 50°C either indoor or outdoor.
TECHNICAL PARAMETERS
Initial Test Force: | 10 kgf |
---|---|
Total Test Force: | 60 kgf, 100 kgf, 150 kgf |
Testing Range: | 20-88 HRA, 20-100 HRB, and 20-70 HRC |
Testing Resolution: | 0.1 HR |
Indication Error: | complying with IS06508, ASTM E18 standards |
Repeatability Error: | complying with IS06508, ASTM E18 standards |
Test Force Error: | ≤ ± 1% |
Operating Temperature: | 0-50°C |
Nominal Dimension: | 245 mm x 105 mm x 138 mm |
Weight: | 5.3 kg |
Test Piece Surface: |
Flat: Area ≥ 195 mm x 60 mm Thickness ≥ 5 mm Cylinder: Diameter ≥ 50 mm Lenghth ≥ 200 mm; Thickness ≥ 8 mm |
STANDARD ASSEMBLY
- Tester
- 120° Diamond Indenter
- 1.588 mm Carbide Alloy Ball Indenter
- Rockwell Hardness Block
- Seat Iron
- Recharger
- Battery Box
- Carrying Case