PK PHB-3000 Hydraulic Brinell Hardness Tester
Barcol Impressor Malaysia Barcol Hardness Tester Selangor Hydraulic Brinell Hardness Tester Malaysia Barcol Hardness Tester Penang Barcol Hardness Tester Johor
INSTRUMENT FEATURES
- Test principle. Apply hydraulic principle permiting loading 3,000 kgf manually.
- On-site Testing. It could be applied in workshop, simple operation, easy carrying, and testing body hardness of large parts piece by piece.
- Permanent Indentation. By 3,000 kgf and 10mm test ball, the indentation is permanent for re-inspecting.
- High Reliability. It follows Brinell hardness test method completely, the same as desk testers, reflecting the actual mechanical property of material or parts.
- High Accuracy. Indication error, repeatability error and test force accuracy comply with ISO, and ASTM standards, the same as desk testers.
- Wide Application Range. As long as clamped to the parts, it could test parts in any shape and size.
- Wide Test Range. It could test various common metal materials by its combination of different test force and test head, that is, wide test range.
APPLICATION
- On-site test of steel products, nonferrous metal, castings, forgings, and semi-finished heat treatment parts.
- Applied to too large parts for desk testers to test. Replace Leeb testers which are in low accuracy and reliability.
- Indentation could be read by Brinell indentation measurement system and hardness values displayed directly.
TECHNICAL PARAMETERS
| Test Force: | 3000 kgf ( 1000 kgf, 750 kgf, 500 kgf optional ) |
|---|---|
| Test Ball: | 10mm Carbide alloy ball ( 5mm optional ) |
| Test Range: | 32-650 HBW |
| Opening Dimension: | 350 mm (Height) x 100 mm (Throat depth) |
| Indicator Error: | complies with ISO 6506, and ASTM E10. |
| Repeatability Error: | complies with ISO 6506, and ASTM E10. |
| Test Force Error: | complies with ISO 6506, and ASTM E10. |
| Weight: | 13.8 kg |
STANDARD ASSEMBLY
- Tester
- Handle
- Brinell hardness block
- Anvil (flat, V-type, spot-type )
- 20X Reading Microscope
- 10mm Carbide alloy ball
OPTIONAL ACCESSORIES
- Brinell Hardness Block (high or low value)
- Carbide alloy ball (5 mm, 10 mm)
- Spare Parts (Hydraulic oil capsule, Hydraulic oil, 0-ring etc.)
- Maintaining Tools
- Brinell Indentation Measurement System
- Rechargeable Angle Grinder
