Three Point Internal Micrometer 360H
Feature:
- Resolution: 0.001mm/0.00005'
- Ratchet stop
- Measuring contact points are designed to allow measurements near the bottom of blind holes
- Measuring surface are carbide
- Additional extensions can be added to increase the measuring depth.
- Setting rings for origin point setting
- SPC data output
| Item | SPEC | Resolution | Tolerance Range |
|---|---|---|---|
| 360H-6 | 6-8 | 0.001mm/0.00005 | 0.004mm |
| 360H-8 | 8-10 | 0.001mm/0.00005 | 0.004mm |
| 360H-10 | 10-12 | 0.001mm/0.00005 | 0.004mm |
| 360H-12 | 12-16 | 0.001mm/0.00005 | 0.004mm |
| 360H-16 | 16-20 | 0.001mm/0.00005 | 0.004mm |
| 360H-20 | 20-25 | 0.001mm/0.00005 | 0.004mm |
| 360H-25 | 25-30 | 0.001mm/0.00005 | 0.004mm |
| 360H-30 | 30-40 | 0.001mm/0.00005 | 0.004mm |
| 360H-40 | 40-50 | 0.001mm/0.00005 | 0.005mm |
| 360H-50 | 50-63 | 0.001mm/0.00005 | 0.005mm |
| 360H-62 | 62-75 | 0.001mm/0.00005 | 0.005mm |
| 360H-75 | 75-88 | 0.001mm/0.00005 | 0.005mm |
| 360H-87 | 87-100 | 0.001mm/0.00005 | 0.005mm |
